A DC power supply is the main component in most of the electronic appliances. DC: It stands for Direct Current, in which the current flow is unidirectional. The process of dc to dc 12v 12v is done with DC converters. The charge carriers in DC supply move in one direction. Solar cells, batteries and thermocouples are the sources of DC supply.
DC-DC Conversion: A
dc dc converter 12v to 6v
borrows the voltage from a DC source and converts the voltage of supply to
other DC voltage level. It is used to increase or decrease the voltage level.
Electronic Conversion: DC
to DC converters in electronic circuit is based upon switching technology. Switched
mode DC-DC converter converts the DC voltage level. The storage is initiated
through magnetic field components like an inductor, transformers or electric
field components like capacitors.
Magnetic Conversion: In
DC-DC converters, the energy is periodically stored and released from a
magnetic field. By adjusting the cycle of the charging voltage the amount of
power transferred to a load can be easily controlled and this control can also
be applied to the input current, the output current as well as to maintain
constant power.
Non-Isolated Converters: Non-isolated
converters are used when the shift in the voltage is small. The input and
output terminals share the same ground in the circuit.
Isolated Converters: These
converters have a gap between input and output terminals. They consist of high
isolation voltage properties. They can block the noise and interference. This
allows them to produce a cleaner DC source. To get more details about dc dc
converters, please visit www.hvmtech.com.